Mincon HDD30 Pilot Hammer
The Mincon HDD30 pilot hammer is part of Mincon’s comprehensive range of class-leading HDD systems. Thanks to Mincon’s advanced design, these systems have a high-frequency cycle that results in smaller chips, resulting in easier hole flushing, less vibration, better steerability, and unmatched production in all hard-rock applications.
- Pilot bit: 89 mm (3.5”)
- Thread type: 2⅜” API Reg Pin
- Rig Application: Up to 4,535kg (10,000 lbs)
- Available accessories: Manual Oiler / Remote Oiler / Foam Injection System
- Hammer lubrication: Mincon RDO Envirosafe Rock Drill Oil
- Recommended drilling fluids: Mincon Hole Control (Polymer) / Foam
- Compatibility: DCI / Subsite
- Bit Type: Steering / Round
- Bent Sub: 1.5 Degree
- Minimum recommended air package under 76m (250′): 11.3m³/min @ 17.2 bar (400 cfm @ 250 psi)
- Minimum recommended air package over 76m (250′): 14.2m³/min @ 24 bar (500 cfm @ 350 psi)
*After-cooled air. Mincon recommends using after-cooled air compressors when ambient temperatures exceed 7 degrees celsius (45 degrees Fahrenheit).
